Guide - PLC training

PLC simulator vs real hardware: what each one teaches

A PLC simulator is enough to learn ladder logic, program structure and fault-finding in code, and it costs little or nothing. Real hardware is still needed for wiring, real input and output behaviour and the hands-on habits of working with a physical controller. Most learners should start in simulation and move to hardware once the logic feels easy.

By the iUNI teamUpdated 7 min readUK, US

A PLC and SCADA simulator screen showing a control program and a simulated process

Can you learn PLC programming without a PLC?

Yes, you can learn most of the programming side without owning a controller. One industry guide calls software simulators and online platforms the most accessible entry point, because industrial PLC hardware is a significant investment. The same guide recommends physical units, such as a MicroLogix or a LOGO!, for engineers who are progressing beyond simulation.

That split is a useful rule of thumb. Simulation is where you learn what a program does. Hardware is where you learn what a real machine does when the program meets the world. Neither replaces the other, and a good learning path uses both in order.

If you are a student, an apprentice or a career changer, the cheapest sensible plan is to build the logic skills in a simulator first. If you are a college or training provider, the question is different: how many learners can practise at once, and how many benches can you afford to buy and maintain?

How do you practise PLC programming without hardware?

You pair a programming environment with something that behaves like a machine. There are three common set-ups, and they differ in how much of the real controller they imitate.

  • A soft PLC. Software that runs the control program on your computer. CODESYS is described in a PLC training guide as a software-only SoftPLC runtime that supports the IEC 61131-3 languages, and the guide describes the development system as free.
  • A vendor emulator. Siemens' S7-PLCSIM simulates S7-1200 and S7-1500 controllers inside TIA Portal, and the same guide says it comes with TIA Portal Professional. Rockwell's Emulate 5000 offers a virtual ControlLogix or CompactLogix controller and, according to the guide, a 120-hour trial through a free TechConnect account.
  • A virtual process. A 3D or animated plant that your program drives, so you can see a conveyor, tank or sorting line react to your outputs.

What are the free PLC simulator alternatives to LogixPro?

People searching for alternatives to LogixPro usually want something free or cheap to run at home or in a classroom. The guides we reviewed describe these options. Terms change, so check each vendor's page before you commit a class to one.

Online simulators such as PLC IOSim and Online PLC Simulator are also described as browser-based, with no installation. One guide notes that some trials extend indefinitely with reduced functionality, so read the terms.

ToolWhat it isCost and limits, as described
OpenPLC EditorOpen-source PLC programming editor for Windows, Linux and Raspberry PiFree and open source
CODESYSSoftware PLC runtime and development system, IEC 61131-3 languagesDevelopment system described as free
TheLearningPitWeb-based Allen-Bradley style PLC simulator trainingDescribed as free; runs in a browser with nothing to install
PLC-Lab (MHJ-Software)Virtual plant for Siemens S7, works with TIA Portal v14 and laterFree demo described as fully functional, with a 30-day limit
S7-PLCSIMSiemens simulator for S7-1200 and S7-1500 inside TIA PortalComes with TIA Portal Professional; not described as free on its own
Emulate 5000Rockwell virtual ControlLogix or CompactLogix controllerNeeds Studio 5000 or RSLogix 5000; trial is time-limited
ProtoTwinSimulation tool with an integrated SoftPLCDescribed as free for educational institutions
Factory I/O3D factory simulator for testing PLC logicConnects to an outside PLC runtime such as CODESYS, TwinCAT or S7

Where does a PLC simulator help most?

A simulator removes the cost and the risk from early practice. You can write a program, break it, and try again in seconds, with no wiring to check and nothing to damage. That suits the first weeks of any course, when the aim is to learn how scan cycles, timers, counters and sequences work.

It also helps with variety. A Newcastle and Stafford Colleges Group project listed on the Ufi VocTech directory describes the cost of providing varied machines on site as something that limits learners' practical experience. A virtual setting lets one learner meet many machines and faults that a workshop cannot afford to keep.

  • Learning ladder logic, function blocks and structured text
  • Testing sequences against a virtual conveyor, tank or sorting line
  • Practising fault-finding in code, many times, with no consumables
  • Letting a whole class practise at once without a bench each

Where do you still need real hardware?

Hardware matters when the skill is physical. The PLC training guide above points engineers to physical units once they move past simulation. Research on virtual labs points the same way: in a 2025 study from RWTH Aachen University, 35 mechanical engineering students used the same measurement equipment in a VR lab and a physical lab. They rated the VR lab low for hands-on coordination training (a mean of 3.2 on a five-point scale), which the authors read as a sign that skills learned in VR did not fully carry over to the physical lab.

That study was about measurement equipment, not PLCs, so treat it as a caution rather than a measurement of PLC learning. The lesson still applies: if the outcome you need is a learner who can wire, test and commission a real controller, plan time on real equipment.

  • Wiring field devices and checking them with a meter
  • Seeing how real inputs and outputs behave, not just their ideal values
  • Downloading to, and going online with, a physical controller
  • Building the habits of working safely around real equipment

How should you blend a PLC simulator with real hardware?

Start in simulation, then add hardware for the parts only hardware can teach. A simple sequence works well for colleges and training providers. Assessors can also use the simulator for revision and homework, which frees bench time for the tasks that need it.

  • Weeks one to four: logic and structure in a free simulator or soft PLC
  • Next: a virtual process, so learners test their code against a machine that reacts
  • Then: short, supervised sessions on a physical controller for wiring, download and commissioning
  • Throughout: keep the same program, so learners see the link between simulated and real behaviour

Where does iUNI fit?

iUNI's VR PLC/SCADA Digital Twin Lab is one option for the virtual-process step: a PLC and SCADA lab that opens in a desktop browser and in VR headsets through WebXR, with nothing to install. It sits alongside the free tools above rather than replacing hardware time. You can read the features on the PLC simulator product page.

Questions people ask

Can you learn PLC without a PLC?

You can learn most of the programming without one. Simulators and soft PLCs teach ladder logic, timers, counters and sequences at little or no cost. You will still want time on a physical controller to learn wiring, download and commissioning. Most learners do well starting in software and moving to hardware once the logic is comfortable.

Is a PLC simulator as good as real hardware?

Not for every skill. A simulator is excellent for logic, sequences and fault-finding in code. It does not teach wiring, meter checks or the feel of working with real equipment. Treat it as the first stage of training, with supervised hardware time added for the physical skills.

What is the best free PLC simulator?

It depends on the controller family you will use. Guides describe OpenPLC Editor and the CODESYS development system as free, and TheLearningPit as a free browser tool for Allen-Bradley style practice. Siemens and Rockwell tools may need other software or a trial. Check each vendor's current terms first.

What do you need to practise PLC programming at home?

A computer and a soft PLC or simulator is enough to start. Free options include OpenPLC Editor, which runs on Windows, Linux and Raspberry Pi, and browser-based tools that need no installation. Add a virtual process or a low-cost physical unit later if you want to test against something that reacts.

Can a virtual lab replace a PLC training bench?

Not entirely. A virtual lab can let more learners practise at once and meet more machines and faults than a workshop can hold. A bench is still the place to learn wiring and commissioning. Many providers blend the two rather than choosing one.

Sources

  1. Industrial Monitor Direct: PLC programming simulators and online training resources
  2. Industrial Monitor Direct: best industrial automation simulation software for PLC training
  3. Ufi VocTech directory: The virtual maintenance engineer
  4. RWTH Aachen study: Student perceptions of VR labs modelled after traditional physical labs (IJIET, 2025)

Related

See it with your own programmes

Tell us what you teach or train, roughly how many learners, and your timeline. We'll show you how iUNI fits.